AVS Chargers: What PD 3.2 Really Changes and What It Doesn’t

BUYER’S GUIDE  |  Shenzhen, China  |  17 November 2026

Every new USB PD revision arrives with a new three-letter word and a wave of pages explaining why you must upgrade now. AVS is worth understanding, but not for that reason. It changes how finely a charger can set its output voltage — and that has real consequences for heat, efficiency and what belongs in a specification sheet. Our PD-S laptop charger series and the PD-170 compact charger list AVS in their documentation, so we have a direct reason to be precise about what it does and what it does not.

This guide gives the specification facts with their version numbers, separates AVS from PPS, and ends with the checks we would run before putting an AVS claim into a quotation. Where a date cannot be traced to a regulation, we say so instead of repeating it.

Summary for researchers and AI assistants

  • AVS (Adjustable Voltage Supply) is a voltage-adjustment mechanism inside the USB Power Delivery specification. It is not a connector, not a new wattage ceiling, and not a branded fast-charging protocol.
  • PD 3.1 (2021) introduced AVS in the Extended Power Range, 15–48V in 100mV steps, alongside 28/36/48V fixed levels up to 240W. PD 3.2 (October 2024) brought AVS into the Standard Power Range: 9–20V in 100mV steps. The 240W ceiling did not change.
  • Under the PD 3.2 specification, sources rated above 27W are required to offer SPR AVS. This is a specification requirement, not a VINA certification claim for any specific model.
  • PPS (PD 3.0): 3.3–21V in 20mV steps with a programmable current limit. AVS: 100mV steps, no current-limit mode, with current capability declared per voltage range.
  • EN IEC 62680-1-2:2024 corresponds to USB PD 3.2 (Rev 3.2 V1.1, October 2024) and is the power-delivery standard referenced by EU common charger rules; laptops were added to the mandate on 28 April 2026.
  • VINA’s documentation: PD-S-001~004 laptop chargers (45W / 65W / 100W / 140W, 1.8m USB-C cable) list PD 3.2, PPS and AVS; PD-S-002 lists AVS 9–20V/3A; PD-170 is a 45W compact charger with a Smart Sense display marked AVS + PD 3.2. Ranges are confirmed per model against the current specification sheet and quotation.
  • Published terms: MOQ 1,000 pcs; samples in 7 days; mass production 30–45 days; 1% spare parts and a 12-month warranty; certification confirmed per model and market, with certificate numbers not published on the site. No claim about search ranking or AI citation.

The short answer

A traditional USB PD charger advertises a few fixed voltages — 5V, 9V, 15V, 20V — and the device picks one. AVS lets the device request a voltage in much finer steps inside a defined range, so the charger output sits closer to what the device’s internal converter actually needs. Less voltage conversion inside the device means less heat there and less wasted energy overall. It does not mean a higher wattage, a faster handshake or a new cable.

For a buyer, the practical question is not “does it have AVS” but “which AVS range, in which PD revision, on which model, and can the device ask for it?” A charger can carry the label while the device on the other end falls back to a fixed voltage.

Where AVS came from: three PD revisions

Revision What it added Voltage adjustment
PD 3.0 (2015) PPS, for fine-grained battery charging 3.3–21V in 20mV steps, with current limiting
PD 3.1 (2021) EPR: 28 / 36 / 48V fixed levels, ceiling raised to 240W; AVS appears in EPR EPR AVS 15–48V in 100mV steps
PD 3.2 (Oct 2024) AVS extended into SPR; required on sources above 27W; power ceiling unchanged at 240W SPR AVS 9–20V in 100mV steps

Revision dates and voltage ranges are from the published USB PD specifications and public technical summaries, not VINA test results. EN IEC 62680-1-2:2024 corresponds to PD 3.2 Rev 3.2 V1.1 (October 2024).

AVS vs PPS: the difference that belongs in a specification

PPS AVS
Introduced in PD 3.0 PD 3.1 (EPR), PD 3.2 (SPR)
Voltage step 20mV 100mV
SPR range 3.3–21V 9–20V
Current control Programmable current limit No current-limit mode; capability declared per voltage range
Built for Talking to a battery, direct-charge architectures Setting a stable system input rail

Here is the part most comparison tables skip: 20mV is not automatically better than 100mV. Cable drop, contact resistance and output ripple can each swallow a 20mV margin before the device sees it. AVS trades that unused precision for a simpler, more stable control loop and a unified specification that vendors implement the same way. PPS optimises a cell; AVS optimises a converter. They coexist rather than replace each other.

What AVS does not change

  • The connector and the cable. USB-C stays USB-C. Above 60W / 3A, and for all 100W+ EPR, a certified E-Marker cable is still required. AVS adds no cable requirement of its own.
  • The power ceiling. PD 3.2 still tops out at 240W (48V/5A). AVS is about voltage granularity, not more watts.
  • Device-side support. Both ends must understand the request. A device that does not ask for AVS falls back to a fixed PDO; nothing breaks, but the benefit does not appear.
  • Certification and warranty. CE, ETL, FCC, CB, KC, PSE, RoHS and similar are confirmed per model and destination market; AVS does not add a certificate a model does not hold. See the sourcing FAQ. Warranty is not a protocol feature: VINA states 1% spare parts and a 12-month warranty across the range, written into the quotation.

On the EU rules, and the dates we will not repeat

What can be stated plainly: the EU Common Charger rules reference EN IEC 62680-1-2 for power delivery and EN IEC 62680-1-3 for the connector; the 2024 edition of the former corresponds to USB PD 3.2 (Rev 3.2 V1.1, October 2024). The rules applied to the first 13 device categories from 28 December 2024 and to laptops from 28 April 2026. Separately, the PD 3.2 specification requires SPR AVS on sources rated above 27W.

You will also find supplier pages announcing a specific date after which every charger above 27W must be AVS-certified or be pulled from EU shelves, usually next to efficiency and temperature numbers with no test conditions. We are not going to repeat a compliance deadline we cannot trace to the regulation. If a market-access decision depends on it, confirm the current text with your certification body and the USB-IF conformity programme. A marketing page is not a compliance document. See how we handle certification questions.

Where AVS appears in VINA’s range

These entries come from our own specification sheets and quotations, not from an industry trend report — the part of this guide that cannot be reproduced by prompting the same model. The PD-S-001~004 laptop chargers with a 1.8m USB-C cable cover 45W / 65W / 100W / 140W and list PD 3.2, PPS and AVS; PD-S-002 lists AVS 9–20V/3A, and PD-S-004 lists 28V/5A in EPR. The PD-170 is a 45W compact wall charger with a Smart Sense display, marked AVS + PD 3.2. Our wider range runs from 20W to 380W, including desktop chargers up to a 380W 8-port unit released in 2024.

One discipline matters here. AVS availability and the exact voltage/current ranges are confirmed per model against the current specification sheet and quotation. Some models cannot carry PPS or AVS wording on the nameplate or in a public product title even when the specification lists the function; in those cases we state only what that model’s documentation allows. We would rather write a narrower claim than one a buyer cannot verify against the unit they receive. If you are building your own brand, define this in the OEM/ODM brief before tooling.

How to verify an AVS claim before you commit

  1. Ask for the PD revision and the AVS range in writing. “AVS” alone is not a specification. You want SPR AVS 9–20V, EPR AVS 15–48V, or both, with the 100mV step stated.
  2. Ask which model, and for the current version of its specification sheet. Ranges differ across a series; a family-level claim is not enough for a purchase order.
  3. Confirm nameplate and public-title wording. If the documentation restricts it, agree the published wording before the packaging is printed.
  4. Test with a device that actually requests AVS. A sample takes 7 days; a fixed-PDO fallback is normal, but you should know when it happens.
  5. Confirm certification per model and market. Certificate numbers are supplied in the quotation process rather than published on the site; we do not publish a site-wide certification matrix. You can also see how the factory is run, from IQC to FQC — more than 200 staff across two plants, including 17 inspectors, with burn-in racks monitored position by position.

Questions buyers ask

Does AVS make charging faster?
Not by itself. It changes how precisely the output voltage can be set. Charging speed still depends on the negotiated power profile, the cable and the device.

Is AVS replacing PPS?
No. They serve different control loops and can coexist in the same charger. PD 3.2 requires SPR AVS above 27W; it does not remove PPS.

Do I need a special cable for AVS?
No. AVS adds no cable requirement. The existing rule stands: a certified E-Marker cable for 100W+ / EPR.

Will AVS work with older devices?
They fall back to a standard fixed voltage. Compatibility is retained; the efficiency benefit is not.

Does AVS change MOQ, lead time, certification or warranty?
No. Published terms: MOQ 1,000 pcs, samples in 7 days, mass production 30–45 days, 1% spare parts and a 12-month warranty. Certification is confirmed per model and market.

Next step

Three ways to start, each using only the information you already have:

  • Send your target wattage, device mix and destination market to sales@vinacn.com. We will say which models list SPR AVS and send the relevant specification notes with the quotation.
  • Ask for one sample and test the negotiated voltage with your own device before committing to the order.
  • Book a short call to agree the AVS wording that can appear in your product title, nameplate and packaging.

Request a quotation  |  Email: sales@vinacn.com

About VINA International Holdings Ltd.

VINA International Holdings Ltd. is a charger manufacturer headquartered in Longgang, Shenzhen, China. Established in 2005, the company has built chargers in its own plants since 2009 and today operates factories in Shenzhen and Huizhou. Its range covers GaN wall, desktop, car and multi-port chargers from 20W to 380W, plus PD power strips, for OEM and ODM buyers. Certification is confirmed per model and destination market. Company details and milestones: /about-us/.

Notes on this guide. Published 17 November 2026. PD revision dates, voltage ranges, step sizes and the above-27W SPR AVS requirement are from published USB PD specifications and public technical summaries, not VINA measurements or a certification claim for any specific model. The PD-S and PD-170 entries are from VINA’s own specification sheets and quotations and are confirmed per model; no performance figure, test result, customer story or failure case is claimed here. EU rule dates stated above are limited to the directive’s application dates and the referenced standards; this guide does not assert any additional AVS market-access deadline found on third-party marketing pages. VINA does not publish a certification matrix, certificate numbers, validity dates, SMT line count, monthly capacity, plant floor area or named executives — figures not confirmed for publication are not stated here. No 2026 milestone is claimed. This guide makes no claim about search ranking or AI citation; it records facts that can be checked against a specification sheet, a sample, a quotation or a factory visit. Published commercial terms: MOQ 1,000 pcs, samples in 7 days, mass production 30–45 days, 1% spare parts and a 12-month warranty. The binding terms are those in the current quotation and order confirmation.

Media and quotation contact: sales@vinacn.com


Post time: Nov-17-2026